Description
CAD-CUT® Premium Plus™ Heat Transfer Vinyl
Application Instructions
High Tack Application Instructions
Time:8-12 SecondsTemp:280-300°F/138-149°CPressure:MediumPeel:HotTwo-Color:5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds
Heated Lower Platen – 100% Polyester
Time:10 secondsUpper:270°FLower:320°FPressure:60 psi (#6/Medium on Hotronix)Peel:Warm for Low Tack; Hot for High Tack
Heated Lower Platen – 95% Polyester / 5% Spandex / Triblends
Time:30 secondsUpper:270°FLower:290°FPressure:60 psi (#6/Medium on Hotronix)
Hotronix® 360 IQ™ Hat Press (High Tack Only)
Time:45 secondsUpper:280°FLower:320°FPressure:MediumPeel:Warm/ColdCover Sheet:1/8″ Foam Pad
Special Notes
Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester. Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
Care Instructions
Machine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material/Fabric Compatibility
- 100% Cotton
- 100% Polyester
- 100% Preshrunk Cotton
- Cotton/Poly Blends
- Lycra®/Spandex Blends
Note
The recommended time, temperature, and pressure settings are for Stahls’ Hotronix® heat press machines. Settings on other heat presses may vary.
Cutter Guidelines
CutterBladeForceOffsetSpeedGraphtec45°9-11020cm/sRoland GS-2445°90-110g.2520cm/s View Craft Cutter SettingsNote: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16″ for lettering & logos.
Reviews
There are no reviews yet.