Description
Celebrate all the good times you can have with the Baby Lock Celebrate Serger BLS1 with Jet Air Threading. The Baby Lock Celebrate Serger BLS1 with Jet Air Threading is easy to use, lightweight, and portable; you can take it to classes and guild meetings. Create perfectly finished edges on garments, blankets, and more. Serge decorative edges using two, three, or four threads. The Celebrate Serger can sew blind hems, lettuce edges, flatlock, rolled edges, and more! These beautiful finishes will allow you to give your garments, blankets, and home decor items a professionally finished appearance. This machine will serge up to 1500 stitches per minute, has a jet-air threading system, and is capable of 4/3/2 thread serging. Babylock’s Celebrate can also handle thicker fabrics thanks to its adjustable presser foot height. With all the features packed into Babylock’s Celebrate Serger, it will tackle any project you place under its needle with ease.
Bonus Included
Baby Lock 60-Day Love of Knowledge Subscription
16 Spools Maxi Lock Serger Thread
JET-AIR THREADING
Celebrate’s superior Jet-Air Threading system allows you to thread your machine with the touch of a lever. You don’t have to worry about thread guides on this machine; you can spend more time serging than struggling to feed your thread through the loopers.
VERTICAL NEEDLE PENETRATION
Unlike other machines that use slanted needles, the Celebrate Serger uses needles that are set vertically. Slanted needles tend to push and damage fabrics, while the Celebrate only moves up and down. This up and down movement protects your materials and helps to prevent needle deflection.
FABRIC SUPPORT SYSTEM
Celebrate’s Fabric Support System keeps your stitches flat and stable, regardless of the speed, fabric, or stitches you choose. There are built-in stitch fingers that move in conjunctions with the knife, adjusting the seam concurrently with the cutting width. This operation, when combined with the Micromatic Twin Cam Tension System, gives you superior stitching capabilities.
MICROMATIC TWIN CAM TENSION SYSTEM
Get perfectly flat stitches and eliminate thread tangles with the Micromatic Twin Cam Tension System. This system ensures that your thread glides smoothly through the tensions. When paired with the fabric support system, your stitches will lay smooth against your fabric regardless of the width of your stitches or type of material.
ADVANCED KNIFE DRIVING AND ONE-WAY CLUTCH SYSTEM
With its extra-high presser foot and Advanced Knife Driving and One-Way Clutch System, your serger has a larger cutting bite that cuts thicker fabric with ease and increased visibility.
DIAL ADJUSTABLE STITCH LENGTH AND AUTOMATIC ROLLED HEM
Easily adjust your stitch length with a flick of the wrist. The Celebrate has one dial that includes an automatic rolled hem setting that will retract the built-in stitch width finger for a rolled hem finish.
ADJUSTABLE PRESSER FOOT
The Celebrate presser foot can be raised up to 6mm (3/18″). These few extra millimeters can make a huge difference when sewing thicker fabrics like denim or fleece.
FEATURES
Jet-Air Threading
Micromatic Twin Cam Tension System
Full-Featured Differential Feed
2 to 1 Ratio – gathering
3 to 4 Ratio – stretching
4/3/2 Thread serging
Exclusive Fabric Support System
Vertical Needle Penetration
Pure lighting with 1 LED light
Rolled hemming with 2 or 3 threads
Flatlock stitching with 2 or 3 threads
Dial adjustable stitch width: 1.5 – 7.5mm
Dial adjustable stitch length: 0.75 – 4mm
Dial adjustable built-in rolled hem
Knife and needles closer for easier serging curves
Heavy-duty cutting system
Side thread cutter
1500 Stitches per minute
Presser foot pressure adjustment
Adjustable presser foot height up to 6mm
Built-in needle threading system
Electronic foot control
Enhanced telescopic antenna with thread guides
Snap on, multi-purpose presser foot
Built-in ribbon/tape guide
Built-in accessory storage
Carry handle
SPECIFICATIONS
MACHINE ONLY WEIGHT: 16 lbs
MACHINE ONLY HEIGHT: 11.5″
MACHINE ONLY WIDTH: 12.5″
MACHINE ONLY DEPTH: 11″
LIGHTING: 1 LED
MAXIMUM STITCH WIDTH: 7.5mm
MAXIMUM STITCH LENGTH: 4mm
NUMBER OF NEEDLES: 2
NEEDLE THREADER TYPE: Jet-Air Threading
THREAD CUTTER TYPE: Built-in
NUMBER OF FEET INCLUDED: 1
FEEDING SYSTEM TYPE: Differential
TENSION SYSTEM: Micromatic Twin Cam
ACCESSORY STORAGE: 1
ROLLED HEM: Built-in
MAXIMUM NUMBER OF THREADS: 4
TWO-THREAD OVERLOCK CONVERSION: 1
PRESSER FOOT TYPE: Snap-On
Reviews
There are no reviews yet.